THis device is available in a mini gimbal system where total weight is about 2 kg. Then we have a 100 micro radian stabilization and geopointing by GPS functionality.

Miniscan series laser radar system have a weight of 2,5 kg and is an open frame design optimized for medium sized UAV systems or helicopters.

This device can have a range of up to 1500 meter with 10 cm in accuracy. Speed can be between 12500 Hz and 36n KHz. System can handle 2 reflexes per shot and have a signal strength gray scale output.

We can also offer a 300 meter range device with 10 KHz output and 5 mm in accuracy.

Maxiscan 400/1500 laser radar system for aircraft's and helicopters where there is a 400 mm diameter Zeiss camera mount. This device is installed over the hole and scans straight down

Instrument is a 1500 meter range system with 5-10 cm in accuracy. Speed is between 12500 Hz and 36 KHz.

Scanner have a swat angle that is adjustable between 0 and 60 degree. Output is USB 2 interface to an external PC system. Weight is about 11 kg

Midiscann 1500 is a compact version of maxiscan system that is smaller and lighter. Spec in general are same but weight is 7,5 Kg. THis is the standard sensor in Line mapper system for power line 3D mapping.

This is very rugged and robust and can survive a lot in vibrations and bad environment. Output is USB 2 to an external PC with application software.

Multiscan is the first generation of scanner where we had 5 separate high speed distance meters. Now this can be updated with 5 pcs of the new 36 KHZ altimeters making a data collection speed of 180 KHz possible. Output is special interface to an instrument rack.

This is large and heavy and aimed for larger helicopters and aircraft's. Weight is about 56 kg for the complete system ex DGPS and cameras.

Frontscan is a front looking laser radar system for many applications where some are airborne. This is aimed in front of aircraft and can sense what is there like a traditional radar system.

Accuracy is less 10 cm so we can measure and see positions beside the aircraft where normal laser scanners are out of operation.

One application is to detect electrical wires at several hundred meters in distance. This is good for collision avoidance.

One other is to measure the height profile when landing at an area with low contrast. It can see very accurate to snow and sand surfaces where eye have severe problems.

Laser radar based on a rotating wobbling mirror design. Rotates at 20 Hz and make an ellipse under the aircraft. Swat angle is about 30 degree

Sensor can be all of our high speed altimeters. Photo shows a 25 KHz 1000 meter sensor that can handle 6 separate reflexes per pulse. Aperture of receiver is 102 mm and is a cassegrain optic design. Laser emitter is in the mirror center of the detector optics.

Weight is about 6 kg.

Matrix ladar system, for short range applications. THis is a 2 axis array of distance meters giving 11000 distance values per sec in 60 frames per sec.

The 2 axis map is made in a click so we need no motion to scan a surface. This device is very suitable for landing of unmanned aircraft's and helicopters. In applications like landing a small UAV helicopter on a boat this can be the solution.

Weight is about 400 gram all included, USB output. for PC with application software.

Laser radar systems in a vertically stabilized mount. Here we have a gyro and servo motors typo always keep the scanner aimed 90 degree vertically down even if aircraft move and tilt when flying.

This device have a 1000 meter distance 25 KHz laser altimeter scanner installed. Single shot resolution is less 10 cm.

From 2010 we can also deliver a 10 Khz unit that make 300 meter and have a +-5 mm real accuracy.

Weight is about 10 kg all included