This is a small and compact laser distancemeter measuring up to over 400 m to a gray target. If the object have a reflex the distancemeter can measure up to 750 m.The small size makes good in the pockets and it is always available. Resolution is 0.1 m up to 100 m in distance and 1 meter over 100 m in range

Price level about 3200 SEK ( USD 300 )

This is a rugged military style distance meter capable for 999 m in range to a gray target. The system is water proof and easy to operate. The body is made in solid aluminum and very robust. The sighting is done by a 6X telescope with illuminated reticle.

Price level about USD 1500

This is a MIL specified 10000 m distance meter. The system have a built in inclinometer and compass and a RS 232 output for communication The system use a 1,54 micron laser and is eye safe. The system was designed for military applications but there are many non military applications where this system is very attractive.

Price idea about USD 10 000

This is a laserscale based on a phase sensor. The range is up to 100 m to a reflex tape and accuracy is as good as +- 2 mm. Repitability is about 0,5 mm. The system is fully industrial encapsulated to IP 65 degree and there are options for output for industrial standard busses and communications.

This system is optimized for linear movements like cranes and rail cars. System do not operate without reflex tape.

This is phase based distance meter working without any reflector than the natural reflex from the target. Range is up to 15 meter and the system can measure with an accuracy better than 1 cm. The system have options for high out put speed and with the SCSII interface we can offer 312000 Hz in measuring frequency and still with a honest 50 mm in single shot resolution. Awerage values can get sum cm accuract and a few mm in repitability.

This is a unique system capable of generating the complete distance to all pixels in an image of a camera view. This system is very unique and it offers capabilitis over traditional distance meters as it measure the distance in many points overe an area at a single sequence

The system can give a real 3D view of the full image.

The upper photo shows the interior of the prototype of a helicopter scanner for making maps. This system measures at 25 000 Hz at ranges up to 1000 m and the scanner wheel rotates at up to 50 Hz. This system is the heart of the Roadmapper system for generation of 3D maps.

The second photo shows a gimbal mounted distancemeter and camera for helicopter applications like 3 D positioning and photography. This is the heart of the Geomapper system.

We use this technology for various applications.

• Laser radar systems and laser profilometers
• Road mapper 3D laser scanner for road cosntruction
• Geomapper 3D camera system for airborne and othjer platforms